相关文章

济南液压升降机操作注意事项

来源网址:http://www.demjx.com/

在经济迅速发展的当今社会,液压升降机已经应用到各行各业当中,日常生活往往都依赖着升降平台。升降平台种类繁多,其中以移动式升降机平台用途最为广泛,被广泛的用于工业、建筑、甚至农业和商业。既然使用如此频繁,那么在使用时应该注意些什么呢?

1、操作人员必须经过专门培训,考试合格,持证上岗才可进行操作。

The operator must go through specialized training, examination, certificates in order to operate.

2、升降平台操作人员必须按照机械设备的保养规定,在执行各项检查和保养后方可启动升降机平台,工作前应检查平台的工作范围,清除妨碍平台车回转及行走的障碍物。

The operator must follow the lifting platform maintenance requirements of machinery and equipment, after the implementation of the inspection and maintenance before starting the lift platform, the scope of work should be checked before work platform, platform trucks cleared hinder rotation and walking obstructions.

3、升降平台作业前,工作负责人应向操作人员进行技术和安全交待,工作负责人除要对车况和操作人员进行检查以外,还要负责查看地形环境、起降是否符合安全技术措施的要求或事先制定的工作方案,如有出入,则应制定出相应的措施后方能开始工作。

Before lifting platform operations, responsible person shall operate technology and security personnel accountable, responsible person other than you want to check the condition and operating personnel, but also for view terrain, landing meets the safety requirements or prior technical measures program of work to develop and, if different, you should start working after order to develop appropriate measures.

4、支撑是平台操作的一项重要准备工作,应选择平整的地面,如地基松软或起伏不平,必须用枕木垫实后,才可进行工作。

Support is an important preparatory work platform operator should choose the flat ground, such as soft or rough ground, the pad must be real sleepers before work.

5、工作平台上的操作人员应佩带安全带,在带电区域工作时,应将车体按规定进行接地,升降平台登高作业应由工作负责人进行指挥,负责人应按照GB5082标准规定信号与升降平台操作工进行联系。发出的信号必须清楚、准确。

Work on the platform operator should wear seat belts when working in the charged area, the body should be grounded in accordance with regulations, the lifting platform by climbing operations command responsible person, the responsible person should be required to follow the signal and the lifting platform standard GB5082 workers contact. Signals emitted must be clear and accurate.

6、升降平台一般应先起下臂,再起中臂,最后起上臂。在平台回转操作过程中,必须在下臂起升一定高度后方可进行回转,回转应缓慢,同时注意剪臂及平台对各设备的距离是否满足安全需要。

Lifting platform in general should be from the lower arm, renewed in the arm, and finally from the upper arm. In the process of turning the platform must be performed from the lower arm swing up to a certain height, the rotation should be slow, taking care to cut the distance between the arm and the platform device meets the safety requirements.